Best Brushed Nickel Doorbell Button in 2022 [*Top Picks*]
Looking for the best brushed nickel doorbell button on the market? We’ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.
6113 Reviews Scanned
GE 19232 Direct Wire Door Chime Push Button, Brushed Nickel
Easy do-it-yourself instructions
Works with all standard direct wire doorbell brands
Brushed nickel finish
HEATHCO LLC SL-556-00 Wired LED Push Button, Nickel
Newhouse Hardware SN5WL Lighted Doorbell Button, 1-Pack, Satin Nickel
Lighted surface mount circle door bell button makes it easier to locate in the dark and can be used on stucco or wood surfaces
Doorbell button round with metal housing, bell wire is not included
If using as a replacement door bell button, drilling may not be required
Will work with almost any door bell transformer and wired chimes
PLEASE NOTE: A diode is needed (not included) if you are using a digital chime (plays a melody; has a speaker for the sound). A diode is NOT needed if you are using a mechanical doorbell chime (a 2-note sound; like a small mallet hitting a metal bar).
MSH Modern Stainless Hardware Model R4 Stainless Steel Doorbell Button in 304 Stainless Steel 1.37” x 3.14” x 5/32” (4mm thick)
Modern and Minimalist Stainless Steel Doorbell Design
304 grade Stainless Steel
Replaces regular 12 volt wired pushbutton
Measures 35mm x 80mm x 4mm (1.37” x 3.14” x 5/32”)
Wired Brass Doorbell Chime Push Button in Polished Nickel Finish Vintage Decorative Door Bell with Easy Installation, 3 1/8" X 1 1/2"
SUPERIOR QUALITY DECORATIVE DOORBELL BUTTON - Add quality and style to your entryway with this antique doorbell button. It is the perfect choice for your vintage deco or mid-century home. It features a vintage detailing and a distinctive Polished Nickel finish.
PRODUCT DIMENSIONS Height: 3 1/8 inch, Width: 1 1/2 inch
WIRED DOORBELL PUSH BUTTON - This electric door bell button is designed to operate a standard door chime located within a home. The chime is not included (available at most home improvement stores) and must be hardwired into the wall. It is compatible with existing two-wire electrical systems.
RECESS MOUNTING- A recess is required for all bell buttons. The size is 3/4 X 3/4 inches as shown in the image.
EASY DIY INSTALLATION - Includes installation hardware such as high-quality screws (1 extra). For fixing screws on any wooden surface, mark and drill pilot holes with a drill bit appropriate for the mounting hardware. Put a drop of oil on the screw tip, Insert and tighten the screw. Do not over torque the screw as it may break. The screws supplied are for wooden surfaces. For Metal surfaces other suitable screws must be used.
Broan-NuTone PB7LSN Doorbell Kit, Lighted Rectangular Pushbutton for Home, 0.75" x 1" x 2.88", Satin Nickel
PUSHBUTTON DOORBELL: Pushbutton doorbell with a U.V. Inhibitor touch pad surface that won't yellow in the sun and non-stick action for years of quality use
CLASSIC STYLE: Rectangular-shaped doorbell with a satin nickel finish is perfect for greeting your guests
LIGHT INCLUDED: Lighted pushbutton provides visibility after dark so visitors are never left searching for the doorbell
DURABLE: Weather-resistant finish provides years of dependable, high-quality service
EASY INSTALLATION: Surface mount design fits brick ing, allowing flexibility of surface installation choices for your convenience
GE 19301 Wireless Push Button to Replace Doorbell Button, Brushed Nickel
Wireless push button for plug-in and battery operated GE wireless door chimes
Easy to install, ready to use
150-Foot range from push button
Compatible with the following GE door chime models: 19247, 19248, 19297, 19298, 19299, 19300, 19303
Requires one Cr2032 battery (included)
Craftmade BSCS-BN Designer Surface Mount Contemporary Lighted Doorbell LED Push Button, Brushed Nickel (4.13" x 0.75"W)
CHIME PUSH BUTTON DIMENSIONS: 4.13" High x 0.75" Wide, Weight 3.06lbs
Lighted LED Push Button
INSTALLATION: Surface Mount; Screw Holes Distance: 3.38"
UL Approved for OUTDOOR Locations; ADA Approved
DETAILS: Brushed Nickel Finish
Craftmade TB1020-BN Contemporary Curved Lighted Doorbell LED Touch Button, 5"H x 2"W x 2"D, Brushed Nickel
CHIME TOUCH BUTTON DIMENSIONS: 5" High x 1.75" Wide x 1.5" Deep, Weight 0.5lbs
Lighted LED Touch Button
Visual Confirmation of "Touch Sense" with Button Light Turning Off and On to Confirm Ring; Engineered and Calibrated for the Human Touch - Guaranteed Against False Rings
Can Replace any Button On a 16V System
DETAILS: Brushed Nickel Finish; NEW State of the Art Touch Technology
NICOR Lighting Brushed Nickel Lighted Designer Door Bell Button for Prime Chime (DBNK)
For use with NICOR's PrimeChime only
Made from quality die-cast aluminum
Direct one to one replacement
Lighted Push button for dark applications
Mounting hardware included